United Kingdom & EMEA

TK-7360E
  • TK-7360E
  • TK-7360E
  • TK-7360E
  • TK-7360E
  • TK-7360E
  • TK-7360E

Additional Images

TK-7360E

VHF Compact Synthesized FM Mobile Transceiver (EU use)

Find your nearest Approved Kenwood Centre
Where to Buy


Key Features

Frequency Range: 136-174 MHz
128 Channels/128 Zones
25 Watts RF Output
Emergency Mode
QT & DQT Signalling plus DTMF PTT ID
5-Tone Encode/Decode
Electronic Serial Number
MDC-1200 Signalling (requires special license ID)
D-Sub 15 pin Interface Connector
Requires Optional Microphone

Supplied With

D.C. CableYes
FuseYes, 10 A
Instruction ManualYes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek
Mounting BracketYes
Screw SetYes


FleetSync Signalling Features

External-device SwitchingYes, External devices can be switched (via the AUX output) on receipt of a status ID code
Paging Call FunctionYes
PTT ID Digital ANIYes
Selective CallingYes
Short/Long Text MessagesYes
Status MessagingYes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

MDC1200 Signalling Features

Emergency Encode/DecodeYes
PTT ID Encode/DecodeYes
Radio check DecodeYes
Stun/Revive DecodeYes

Options

Internal GPS BoardYes - NMEA 0183 V2 compatible
"Molex" interfaceVia KCT-60M Cable
Voice Guide & StorageYes

Applicable Standards

R&TTE: EN300 086, 300 113, 300 219, 301 489Yes
EU Safety: EN60065, 60950-1, 60215Yes
Factory Quality Certification and LocationISO 9001. Manufactured in Singapore
For use in the EUYes
IP54Yes
MIL-STD 810 C/D/E/F/GYes

Technical Specifications

Frequency Range - E Type136-174 MHz
Number of Channels128
Number of Zones128
Channel Frequency Spread38 MHz
Channel Spacing - Analogue - Wide/Mid/Narrow25 kHz/20 kHz/12.5 kHz
Antenna Impedance - 50 OhmYes
Current DrainStandby: 0.3 A
Receive: 1.0 A
Transmit: 8.0 A
Frequency Stability± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.2 V DC ± 15%
PLL Channel Steps5.0 kHz/6.25 kHz
Dimensions160 x 43 x 136 mm (Projections not included)
Weight (net)1.2 Kg

Receiver Specifications

Adjacent Channel SelectivityWide/Mid/Narrow - 70/70/60 dB
Audio Output4 W with less than 5% distortion
Intermodulation67 dB
Sensitivity - EIA 12 dB SINAD0.28 µV at 25 kHz
0.28 µV at 20 kHz
0.35 µV at 12.5 kHz
Spurious & Image Rejection70 dB

Transmitter Specifications

RF Power Output (High/Low)25 W / 5 W
FM Noise (EIA)Wide/Mid/Narrow: 45/45/40 dB
Microphone Impedance600 Ohm
Modulation Distortion (Wide/Mid/Narrow)Less than 3%
Modulation Limiting± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz