United Kingdom & EMEA

TK-2000E
  • TK-2000E
  • TK-2000E
  • TK-2000E
  • TK-2000E
  • TK-2000E

Additional Images

TK-2000E

VHF FM Portable Radio (EU use)

Find your nearest Approved Kenwood Centre
Where to Buy


Key Features

Frequency Range: 136-174 MHz
16 Channels
5 Watt RF Output
Internal VOX Function with 10 levels
QT and DQT Signalling
Supplied with KRA-26M Antenna, KNB-63L Li-Ion Battery and KSC-35SE Rapid Battery Charger
Note - does not include any voice scrambler function, making it ideal for use in locations where scramblers are banned
Note - if using the KSC-356 6-way charger, remove the belt clip first

Supplied With

AntennaYes, KRA-26M (146-162 MHz)
BatteryYes, KNB-63L
Belt ClipYes
ChargerYes, KSC-35SE
Instruction ManualYes, English, Spanish, German, French, Dutch, Italian, Portugese, Turkish and Greek
Screw SetYes


Applicable Standards

R&TTE:Yes, EN 300 086, 300 219, 301 489
EU Safety: EN60065, 60950-1, 60215Yes
Factory Quality Certification and LocationISO 9001. Manufactured in Shanghai
For use in the EUYes
IP54Yes
Measurement - EIA StandardsYes
MIL-STD 810 C/D/E/F/GYes

Technical Specifications

Frequency Range - E Type136-174 MHz
Number of Channels16
Channel Frequency Spread30 MHz
Channel Spacing - Analogue - Wide/Mid/Narrow25 kHz/20 kHz/12.5 kHz
Antenna Impedance - 50 OhmYes
Battery LifeWith KNB-63L: 9 hours
- 5-5-90 duty cycle, with battery saver off
Battery Voltage7.5 V DC ± 20%
Frequency Stability± 5 ppm (-20 °C to + 60 °C)
Operating Temperature Range-20 °C to + 60 °C
PLL Channel Steps5.0 kHz/6.25 kHz
DimensionsRadio with KNB-63L:
W x H x D - 54 x 113 x 24.9 mm
Projections not included
Weight (net)Radio only: 130 g
With KNB-63L: 203 g

Receiver Specifications

Adjacent Channel Selectivity70dB at 25 kHz
70dB at 20 kHz
60dB at 12.5 kHz
Audio Output500 mW
Intermodulation65dB
Sensitivity - EIA 12 dB SINAD0.28 µV at 25 kHz
0.28 µV at 20 kHz
0.35 µV at 12.5 kHz
Sensitivity - EN 20 dB SINAD0.35 µV at 25 kHz
0.35 µV at 20 kHz
0.45 µV at 12.5 kHz
Spurious Reponse Rejection (Analogue)70 dB

Transmitter Specifications

RF Power Output (High/Low)5 W / 1 W
FM Noise (EIA)45 dB at 25 kHz
45 dB at 20 kHz
40 dB at 12.5 kHz
Microphone Impedance1800 Ohm
Modulation DistortionLess than 5%
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz