Key Features
| Frequency Range: 450-490 MHz | 
| 16 Channels | 
| 4 Watt RF Output | 
| Built-In Voice Scrambler | 
| Internal Options Boards | 
| FleetSync Digital Signalling, PTT ID and SelCall | 
| QT, DQT and 2-Tone Signalling | 
| PC Programming | 
PMR General Features
| 2-Tone Signalling | Yes | 
| Calling Alert | Yes | 
| Compact Design | Yes | 
| Companded Audio | Yes | 
| Digital ANI Built-in | Yes | 
| DTMF Function | Yes | 
| Dual-mode Scanning | Yes | 
| Ease of Operating Use | Yes | 
| Embedded Message | Yes | 
| Emergency Call Function | Yes | 
| Emergency Key | Yes | 
| Enhanced Kenwood Audio | Yes | 
| Internal Option Port/Ports | Yes | 
| Internal VOX Ready | Yes | 
| Operator Selectable Tone | Yes | 
| Programmable Function Keys | 3 Programmable Function Keys | 
| PTT ID | Yes | 
| QT (CTCSS) / DQT (digital) | Yes | 
| Remote Stun and Revive | Yes | 
| Scan | Yes | 
| SelCall Function | Yes | 
| Selectable Microphone Gain | Yes | 
| "Talk Back" Scanning Function | Yes | 
| Time-Out Timer | Yes | 
| Voice Inversion Scrambler | Yes | 
| VOX | Yes | 
| Windows PC Programming and Tuning | Yes | 
FleetSync Signalling Features
| Emergency Status | Yes | 
| PTT ID Digital ANI | Yes | 
| Selective Calling | Yes | 
Applicable Standards
| IP54 | Yes | 
| IP55 | Yes | 
| Measurement - EIA Standards | Yes | 
| MIL-STD 810 F | Yes | 
Technical Specifications
| Frequency Range - M Type | 450 - 490 MHz | 
| Number of Channels | 16 | 
| Channel Frequency Spread | 40 MHz | 
| Channel Spacing | Wide: 25 kHz
 Narrow: 12.5 kHz  | 
| Antenna Impedance - 50 Ohm | Yes | 
| Battery Life | With KNB-35L: 9 hours
 With KNB-25A: 8 hours With KNB-26N: 12 hours - 5-5-90 duty cycle with battery saver off -  | 
| Battery Voltage | 7.5 V DC ± 20% | 
| Frequency Stability | ± 2.5 ppm (-30 °C to + 60 °C) | 
| Operating Temperature Range | -30 °C to + 60 °C | 
| PLL Channel Steps | 5.0 kHz/6.25 kHz | 
| Dimensions | Radio only:
 56 x 109.30 x 18.40 mm With KNB-35L: 56 x 109.30 x 34.50 mm With KNB-25A: 56 x 109.30 x 40.70 mm With KNB-26N: 56 x 109.30 x 40.70 mm - Projections not included -  | 
| Weight (net) | Radio only: 165 g
 With KNB-35L: 290 g With KNB-25A: 355 g With KNB-26N: 400 g  | 
Receiver Specifications
| Adjacent Channel Selectivity | 70 dB at 25 kHz
 62 dB at 12.5 kHz  | 
| Audio Output | 500 mW with less than 10% distortion | 
| Circuitry - Double Conversion Superheterodyne | Yes | 
| Intermodulation | 65 dB at 25 kHz
 60 dB at 12.5 kHz  | 
| Sensitivity - EIA 12 dB SINAD | 0.25 µV at 25 kHz
 0.28 µV at 12.5 kHz  | 
| Spurious Reponse Rejection (Analogue) | 65 dB | 
Transmitter Specifications
| RF Power Output (High/Low) | 4 W / 1 W | 
| FM Noise (EIA) | 45 dB at 25 kHz
 40 dB at 12.5 kHz  | 
| Microphone Impedance | 2000 Ohm | 
| Modulation Distortion | Less than 5% | 
| Modulation Limiting | ± 5.0 kHz at 25 kHz
 ± 2.5 kHz at 12.5 kHz  | 
| Spurious Response (EIA) | 70 dB | 


							
							



