United Kingdom & EMEA

NX-1700AE
  • NX-1700AE
  • NX-1700AE
  • NX-1700AE
  • NX-1700AE

Additional Images

NX-1700AE

VHF Analogue Mobile Transceiver (EU use)

Find your nearest Approved Kenwood Centre
Where to Buy


Key Features

"One Radio" with Multi-protocol Support: designed to operate under an NXDN or DMR digital CAI, and FM analog protocols
Upgradable Digital/Analog mode by software option (no firmware upgrade required)
Easy visible, white backlit LCD display: Alphanumeric, 10-digit, 13-character frame (aliases and icons)
7-color LED indicator used to display various radio status
Renowned KENWOOD Audio Quality: 6 W (max. ) loud audio and optimizable TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings
Max. 260 channels per radio, 128 zones per radio, and 250 channels per zone
Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more
Orange-colored Emergency button & Customizable Emergency functions
D-sub, 15-pin connector on the rear panel
IP54 and MIL-STD 810C/D/E/F/G/H

Supplied With

D.C. CableYes
FuseYes, 10 A
Instruction ManualYes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek
Mounting BracketYes
Screw SetYes


FleetSync Signalling Features

External-device SwitchingYes, External devices can be switched (via the AUX output) on receipt of a status ID code
Paging Call FunctionYes
PTT ID Digital ANIYes
Selective CallingYes
Send GPS DataYes, - from an optional NMEA-0183 GPS
Short/Long Text MessagesYes
Status MessagingYes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

MDC1200 Signalling Features

Emergency Encode/DecodeYes
PTT ID Encode/DecodeYes
Radio check DecodeYes
Stun/Revive DecodeYes

Options

Internal GPS BoardYes - NMEA 0183 V2 compatible
"Molex" interfaceVia KCT-60M Cable

Applicable Standards

RE DirectiveEN300 086, 300 113, 300 219, 301 489
EU SafetyEN60215, EN62368
Factory Quality Certification and LocationISO 9001. Manufactured in Singapore
For use in the EUYes
IP54Yes
MIL-STD 810 C/D/E/F/G/HYes

Technical Specifications

Frequency Range - E Type136-174 MHz
Number of Channels260
Number of Zones128
Channel Spacing - Analogue - Wide/Mid/Narrow25 kHz/20 kHz/12.5 kHz
Antenna Impedance - 50 OhmYes
Current DrainStandby: 0.45 A max.
RX: 2.4 A max.
TX: 10.0 A max.
Frequency Stability± 0.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.2 V DC ± 15%
Dimensions160 x 43 x 137.7 mm (Projections not included)
Weight (net)1.21 kg

Receiver Specifications

Adjacent Channel SelectivityWide/Mid/Narrow - 75/73/65 dB
Audio Output6 W (max.) / 4 W (rated) at 4 Ohm
Intermodulation65 dB
Sensitivity - EIA 12 dB SINAD0.26 µV at 25 kHz
0.27 µV at 20 kHz
0.22 µV at 12.5 kHz
Sensitivity - EN 20 dB SINAD0.32 µV at 25 kHz
0.33 µV at 20 kHz
0.33 µV at 12.5 kHz
Spurious & Image Rejection75 dB

Transmitter Specifications

RF Power Output (High/Low)25 W / 5 W
FM Noise (EIA)Wide/Mid/Narrow: 45/43/40 dB
Modulation Distortion (Wide/Mid/Narrow)3%
Modulation Limiting± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)< 1 GHz ≤ -36 dBm
1 GHz - 4 GHz ≤ -30 dBm