Key Features
Frequency Range: 480-512 MHz |
16 Full-Duplex Channels & Single Priority Scan |
Variable RF Output - 1 W to 25 W |
Windows Programming & Tuning Software |
External Control I/O via D-Sub Connector |
Battery Back-Up System |
Flash Memory For Firmware/System Upgrades |
Durable Die-Cast Chassis Construction |
Supplied With
Cushion | Yes |
D.C. Cable | Yes, 4m long |
Foot | Yes, 4 pcs |
Front Glass | Yes |
Fuse | Yes, 10A |
Handle | Yes |
Hardware Fixture | Yes |
Instruction Manual | Yes, English & Spanish |
Screw Set | Yes |
PMR General Features
Character Display (Numeric) | 2 Characters |
Compact Design | Yes |
Companded Audio | Yes |
DB-25 Accessory Connector | Yes |
DTMF Function | Yes |
Ease of Operating Use | Yes |
Embedded Message | Yes |
Kenwood ESN (Electronic Serial Number) | Yes |
Programmable Function Keys | 6 Programmable Function Keys |
PTT ID | Yes |
QT (CTCSS) / DQT (digital) | Yes |
RSSI Level Indicator | Yes |
Scan | Yes |
SelCall Function | Yes |
Time-Out Timer | Yes |
Transceiver Password | Yes |
Windows PC Programming and Tuning | Yes |
Base Station & Repeater Features
PMR Construction Features
Applicable Standards
FCC | Yes, Parts 90 & 90.210 |
Measurement - EIA Standards | Yes |
Technical Specifications
Frequency Range - K2 Type | 480 - 512 MHz |
Number of Channels | 16 |
Channel Spacing | Wide: 25 kHz Narrow: 12.5 kHz |
Antenna Impedance - 50 Ohm | Yes |
Antenna Connector | RX: BNC TX: N |
Current Drain | Stand-By: 0.8 A Receive: 1.2 A Transmit: 13.0 A |
CW ID | Variable speed/tone frequency/modulation |
CW Message | 8 x 32 characters max. |
Duty Cycle | Receive: 100%
Transmit: 100% |
Frequency Stability | ± 1.5 ppm (-30 °C to + 60 °C) |
Operating Modes | FM |
Operating Temperature Range | -30 °C to + 60 °C |
Operating Voltage | 13.6 V DC ± 15% Negative Ground |
PLL Channel Steps | 5.0 kHz/6.25 kHz |
Repeater Hold Time | From "Off" to 10 seconds |
Test Tone | Variable modulation/frequency |
Dimensions | 483 x 88 x 340 mm |
Weight (net) | 9.7 kg |
Receiver Specifications
Adjacent Channel Selectivity | 83 dB at 25 kHz 75 dB at 12.5 kHz |
Audio Output | 4 W with less than 5% distortion |
Circuitry - Double Conversion Superheterodyne | Yes |
FM Hum & Noise | Wide/Narrow = 50/45 dB |
Intermodulation | 78 dB at 25, 50 kHz 75 dB at 12.5, 25 kHz |
Sensitivity - EIA 12 dB SINAD | 0.35 µV 0.45 µV at 20 dB Quieting |
Spurious Reponse Rejection (Analogue) | 90 dB |
Transmitter Specifications
RF Power Output | 1 W to 25 W |
FM Hum & Noise | Wide/Narrow = 50/45 dB |
Microphone Impedance | 600 Ohm |
Modulation Distortion | Less than 3% |
Modulation Limiting | ± 5 kHz at 25 kHz ± 2.5 kHz at 12.5 kHz |
Spurious Response (EIA) | 80 dB |