United Kingdom & EMEA

NXR-5800E

NXR-5800E

NEXEDGE UHF Digital/Analogue Repeater/Base Station (EU Use)

Find your nearest Approved Kenwood Centre
Where to Buy


Key Features

NXDN Digital Air Interface
AMBE+2TM Vocoder for Natural Sounding Digital Voice
Mixed FM / Digital Operation
Autosenses Received Mode (Digital or Analogue)
Conventional IP Networks

Supplied With

D.C. CableYes
FuseYes, 15A
HandleYes
Instruction ManualYes, English, Spanish, French, Italian, German, Dutch, Turkish & Greek
Mounting BracketYes
Screw SetYes

Base Station & Repeater Features

16 CTCSS/DCS Repeater Controller Built-InYes
19" Rack Mount DesignYes
Audio DistortionLess Than 2%
"Base Station" or "Repeater" Mode OperationYes
Base Station FeaturesYes
CW IDYes
DTMF AUX Input MonitoringYes
DTMF AUX Output ControlYes
DTMF Front Panel PF-Key ControlYes
EIA Voter Tone GenerationYes
External FM Controller InterfaceYes
Flash ROM for Future UpgradesYes
Front Mounted SpeakerYes
Full-Duplex OperationYes
Hang TimerYes
LED Display & IndicatorsYes
Microphone Jack on Front PanelYes
Program/Modem InterfaceYes
Programmable AUX I/OsYes
Programmable Function Keys6
Remote Termination InterfaceYes
Repeater FeaturesYes
Time-Out TimerYes
Volume Control on Front PanelYes
Windows Programming and Tuning SoftwareYes

NEXEDGE Features

FM Analogue Conventional IncludedYes
LTR Analogue Conventional IncludedYes
Multi-Site IP Network CompatibleYes
NXDN Conventional IncludedYes
NXDN Digital 12.5/6.25kHz Channel SpacingYes

NEXEDGE Base+Repeater Features

16 RAN Repeater Controller Built-In - Conventional ModeYes
Busy Call Queuing Priority - Trunked ModeYes
Call Queue Pre-emption - Trunking ModeYes
Channels Per Site - Trunking Mode30
Control Channel Rotation - Trunking ModeYes
Control/Traffic Channel Switching - Trunking ModeYes
Cross/Busy - Trunking ModeYes
ESN Validation - Trunking ModeYes
Ethernet Network Interface - IP Network ModeYes
Fail-Soft Mode - Trunking ModeYes
GIDs Per Network - IP Network Mode60000
GIDs Per Site1000 in Conventional Mode, 3000 in Trunking Mode
Individual & Group Selcall - Conventional ModeYes
IP LAN/WAN Connectivity - IP Network ModeYes
Late Entry - Trunking ModeYes
Mixed FM/Digital Operation - Conventional ModeYes
NXDN Scrambler built-InYes
OCXO Option for 6.25KHz OperationYes
Sites Per Network - IP Network Mode48
UIDs Per Network - IP Network Mode60000
UIDs Per Site1000 in Conventional Mode, 3000 in Trunking Mode
Wide Area All-Group Call - IP Network ModeYes

Applicable Standards

R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166Yes
R&TTE: EN301 166Voice & Data for 6.25KHz Digital
EU Safety: EN60065, 60950-1, 60215Yes
For use in the EUYes
Measurement - EIA StandardsYes
Measurement - EN StandardsYes

Technical Specifications

Frequency Range400 - 470 MHz
Channel SpacingAnalogue : 25 kHz/20 kHz/12.5 kHz
Channel Spacing - Digital - Wide/Narrow12.5 kHz/6.25 kHz
Antenna Impedance - 50 OhmYes
Frequency Stability± 0.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.2 V DC (10.8 ~ 15.6 V DC)
PLL Channel Steps2.5 kHz/3.125 kHz/5.0 kHz/6.25 kHz
Dimensions483 x 44 x 331 mm
- Projections not included -
Weight (net)5 kg

Receiver Specifications

Adjacent Channel Selectivity85 dB at 25 kHz
82 dB at 20 kHz
78 dB at 12.5 kHz
Audio Output3 Watt with less than 5% distortion
IntermodulationAnalogue: 72 dB
SensitivityDigital:
3% BER:
0.33 µV at 12.5 kHz
0.27 µV at 6.25 kHz
1% BER:
-2 dB µV (0.40 µV) at 12.5 kHz
-4 dB µV (0.32 µV) at 6.25 kHz
Sensitivity - EIA 12 dB SINAD0.30 µV
Sensitivity - EN 20 dB SINAD-2.5 dB µV (0.38 µV)
Spurious Reponse Rejection (Analogue)95 dB

Transmitter Specifications

RF Power Output0,5 W / 5 W / 25 W
FM Noise (EIA)Analogue:
55 dB at 25 kHz
53 dB at 20 kHz
50 dB at 12.5 kHz
Modulation DistortionLess than 1%
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz