NX-220E3 dPMR
VHF NEXEDGE dPMR Digital/Analogue Portable Radio - (EU Use)
Key Features
dPMR TS102 658 Mode 1 Peer-to-peer, Mode 2 Repeater operation |
AMBE+2 Vocoder for Natural Sounding Digital Voice |
Operates in dPMR and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue) |
Digital Conventional Voice Mode |
True 6.25 kHz channel spacing operation |
Includes Radio-To-Radio Mode (no repeater needed) |
Also available as a firmware update to current NEXEDGE radios |
Supplied With
Belt Clip | Yes, KBH-12 |
"Channel Stopper" Ring | Yes |
Instruction Manual | Yes, English, Spanish, French, Italian, German, Dutch, Turkish & Greek |
PMR General Features
Battery Saver Mode | Yes |
Battery Status Indicator | Yes |
Busy Channel Lock-out | Yes |
Calling Alert | Yes |
Compact Design | Yes |
Companded Audio | Yes |
Dual-mode Scanning | Yes |
Ease of Operating Use | Yes |
Flash Upgradeable Firmware | Yes |
Internal VOX Ready | Yes |
Low Battery Warning | Yes |
Multiple Scanning Function | Yes |
Programmable Function Keys | 3 Programmable Function Keys |
Programmable TX/RX Indication | Yes, Switchable ON or OFF |
QT (CTCSS) / DQT (digital) | Yes |
Talk Around | Yes |
"Talk Back" Scanning Function | Yes |
Time-Out Timer | Yes |
Voice Annunciation | Yes |
Voice Inversion Scrambler | Yes |
Windows PC Programming and Tuning | Yes |
NEXEDGE dPMR Features
Vocoder | Yes, AMBE +2 |
Broadcast Call | Yes |
Dialing Enter | Yes |
Digital Signalling Formats | Yes, "Colour Code" CC |
Group Call | Yes |
Group ID | Yes, 999999 IDs |
Individual Call | Yes |
Late Entry | Yes |
Prefix Call | Yes |
Unit ID | Yes, 999999 IDs |
Applicable Standards
dPMR: TS 102 658 | Yes, Tier 2 Mode 1 Peer-to-peer mode Tier 2 Mode 2 Repeater mode |
R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166 | Yes |
R&TTE: EN301 166 | Voice & Data for 6.25KHz Digital |
EU Safety: EN60065, 60950-1, 60215 | Yes |
For use in the EU | Yes |
IP54 | Yes |
IP55 | Yes |
Measurement - EIA Standards | Yes |
Measurement - EN Standards | Yes |
MIL-STD 810 C/D/E/F/G | Yes |
Technical Specifications
Frequency Range | 136 - 174 MHz |
Number of Channels | 64 |
Number of Zones | 4 |
Talk Groups | Yes |
Channel Frequency Spread | 38 MHz |
Channel Spacing - Analogue - Wide/Mid/Narrow | 25 kHz/20 kHz/12.5 kHz |
Channel Spacing - Digital | 6.25 kHz |
Antenna Impedance - 50 Ohm | Yes |
Battery Life | 5-5-90 with KNB-57L: approx 11.5 hours with KNB-56N: approx 8.5 hours with KNB-55L: approx 8.5 hours |
Frequency Stability | ± 2 ppm (-30 °C to + 60 °C) |
Operating Temperature Range | -30 °C to + 60 °C |
Operating Voltage | 7.5 V DC ± 20% |
Dimensions | With KNB-57L: 56 x 110.5 x 39.5 mm With KNB-56N: 56 x 110.5 x 43.2 mm With KNB-55L: 56 x 110.5 x 37.5 mm - Projections not included - |
Weight (net) | With KNB-57L: 330 g With KNB-56N: 405 g With KNB-55L: 305 g |
Receiver Specifications
Adjacent Channel Selectivity (Analogue) | 76 dB at 25 kHz 74 dB at 20 kHz 68 dB at 12.5 kHz |
Audio Output | 500 mW with less than 3% distortion. 8 Ohms Impedance |
Intermodulation (Analogue) | 65 dB |
Sensitivity (Analogue) - EIA 12 dB SINAD | 0.28 µV at 25 kHz 0.28 µV at 20 kHz 0.32 µV at 12.5 kHz |
Sensitivity (Analogue) - EN 20 dB SINAD | -3 dB µV at 25 kHz -3 dB µV at 20 kHz -1 dB µV at 12.5 kHz |
Sensitivity (Digital) | 3% BER: 0.25 µV at 6.25 kHz 1% BER: -4 dB µV at 6.25 kHz |
Spurious Reponse Rejection (Analogue) | 75 dB |
Transmitter Specifications
RF Power Output (High/Low) | 5 W / 1 W |
FM Noise (EIA) | Analogue: 45 dB at 25 kHz 45 dB at 20 kHz 40 dB at 12.5 kHz |
Microphone Impedance | 1800 Ohm |
Modulation Distortion | Less than 3% |
Modulation Limiting | Analogue: ± 5.0 kHz at 25 kHz ± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz |
Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz |