Additional Images
NX-1700AE
VHF Analogue Mobile Transceiver (EU use)
Find your nearest Approved Kenwood Centre
Where to Buy
| Tweet | |
Key Features
| "One Radio" with Multi-protocol Support: designed to operate under an NXDN or DMR digital CAI, and FM analog protocols |
| Upgradable Digital/Analog mode by software option (no firmware upgrade required) |
| Easy visible, white backlit LCD display: Alphanumeric, 10-digit, 13-character frame (aliases and icons) |
| 7-color LED indicator used to display various radio status |
| Renowned KENWOOD Audio Quality: 6 W (max. ) loud audio and optimizable TX/RX audio profile: Audio Equalizer, Auto Gain Control (TX/RX) and Microphone type settings |
| Max. 260 channels per radio, 128 zones per radio, and 250 channels per zone |
| Various scan functions: Dual/Single Priority scan, Multi/Single Zone scan and more |
| Orange-colored Emergency button & Customizable Emergency functions |
| D-sub, 15-pin connector on the rear panel |
| IP54 and MIL-STD 810C/D/E/F/G/H |
Supplied With
| D.C. Cable | Yes |
| Fuse | Yes, 10 A |
| Instruction Manual | Yes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek |
| Mounting Bracket | Yes |
| Screw Set | Yes |
PMR General Features
FleetSync Signalling Features
| External-device Switching | Yes, External devices can be switched (via the AUX output) on receipt of a status ID code |
| Paging Call Function | Yes |
| PTT ID Digital ANI | Yes |
| Selective Calling | Yes |
| Send GPS Data | Yes, - from an optional NMEA-0183 GPS |
| Short/Long Text Messages | Yes |
| Status Messaging | Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory. |
MDC1200 Signalling Features
| Emergency Encode/Decode | Yes |
| PTT ID Encode/Decode | Yes |
| Radio check Decode | Yes |
| Stun/Revive Decode | Yes |
Options
| Internal GPS Board | Yes - NMEA 0183 V2 compatible |
| "Molex" interface | Via KCT-60M Cable |
Applicable Standards
| RE Directive | EN300 086, 300 113, 300 219, 301 489 |
| EU Safety | EN60215, EN62368 |
| Factory Quality Certification and Location | ISO 9001. Manufactured in Singapore |
| For use in the EU | Yes |
| IP54 | Yes |
| MIL-STD 810 C/D/E/F/G/H | Yes |
Technical Specifications
| Frequency Range - E Type | 136-174 MHz |
| Number of Channels | 260 |
| Number of Zones | 128 |
| Channel Spacing - Analogue - Wide/Mid/Narrow | 25 kHz/20 kHz/12.5 kHz |
| Antenna Impedance - 50 Ohm | Yes |
| Current Drain | Standby: 0.45 A max. RX: 2.4 A max. TX: 10.0 A max. |
| Frequency Stability | ± 0.5 ppm (-30 °C to + 60 °C) |
| Operating Temperature Range | -30 °C to + 60 °C |
| Operating Voltage | 13.2 V DC ± 15% |
| Dimensions | 160 x 43 x 137.7 mm (Projections not included) |
| Weight (net) | 1.21 kg |
Receiver Specifications
| Adjacent Channel Selectivity | Wide/Mid/Narrow - 75/73/65 dB |
| Audio Output | 6 W (max.) / 4 W (rated) at 4 Ohm |
| Intermodulation | 65 dB |
| Sensitivity - EIA 12 dB SINAD | 0.26 µV at 25 kHz 0.27 µV at 20 kHz 0.22 µV at 12.5 kHz |
| Sensitivity - EN 20 dB SINAD | 0.32 µV at 25 kHz 0.33 µV at 20 kHz 0.33 µV at 12.5 kHz |
| Spurious & Image Rejection | 75 dB |
Transmitter Specifications
| RF Power Output (High/Low) | 25 W / 5 W |
| FM Noise (EIA) | Wide/Mid/Narrow: 45/43/40 dB |
| Modulation Distortion (Wide/Mid/Narrow) | 3% |
| Modulation Limiting | ± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz |
| Spurious Emission (EN) | < 1 GHz ≤ -36 dBm 1 GHz - 4 GHz ≤ -30 dBm |