TK-8102HM
UHF Compact Synthesized FM Mobile Radio - High Power (non-EU use)
Discontinued model
Key Features
| Frequency Range: M Type 450-490 MHz
M2 Type 485-520 MHz M3 Type 400-430 MHz |
| 4 Channels |
| High Power 45 Watt RF Output |
| Emergency Mode |
| DTMF, QT and DQT Signalling |
| Embedded Message, PTT ID and Electronic Serial Number |
| Wide/Narrow Channel Spacing |
| PC Programmable plus Wired Cloning Facility |
PMR General Features
PMR Construction Features
Options
Accessory Features
| Current drain | Standby: ≤ 0.4 A
Receive: ≤ 1.0 A Transmit: ≤ 14.0 A |
Applicable Standards
| Measurement - EIA Standards | Yes |
| MIL-STD 810 E | Yes |
Technical Specifications
| Frequency Range - M Type | 450 - 490 MHz |
| Frequency Range - M2 Type | 485 - 520 MHz |
| Frequency Range - K Type | 400 - 430 MHz |
| Number of Channels | 4 |
| Channel Frequency Spread - M2 Type | 35 MHz |
| Channel Frequency Spread - M3 Type | 30 MHz |
| Channel Frequency Spread - Type 1 | 40 MHz |
| Channel Spacing | Wide: 25 kHz
Narrow: 12.5 kHz |
| Antenna Impedance - 50 Ohm | Yes |
| Frequency Stability | ± 2.5 ppm (-30 °C to + 60 °C) |
| Operating Temperature Range | -30 °C to + 60 °C |
| Operating Voltage | 13.6 V DC ± 15% Negative Ground |
| PLL Channel Steps | 5.0 kHz/6.25 kHz |
| Dimensions | 160 x 43 x 137 mm |
| Weight (net) | 1.0 kg |
Receiver Specifications
| Adjacent Channel Selectivity | 75 dB at 25kHz
65 dB at 12.5 kHz |
| Audio Output | 4 W with less than 5% distortion |
| Circuitry - Double Conversion Superheterodyne | Yes |
| Intermodulation | 70 dB at 25 kHz
60 dB at 12.5 kHz |
| Sensitivity - EIA 12 dB SINAD | 0.28 µV at 25 kHz
0.35 µV at 12.5 kHz |
| Spurious Reponse Rejection (Analogue) | 75 dB |
Transmitter Specifications
| RF Power Output | 45 W |
| FM Noise (EIA) | 45 dB at 25 kHz
40 dB at 12.5 kHz |
| Microphone Impedance | 600 Ohm |
| Modulation Distortion | Less than 3% |
| Spurious Response (EIA) | 70 dB |