NX-1200DCUK2 (DMR)
VHF DMR/Analogue Portable Radio with Standard Keypad and Display (Non-EU Use)
Find your nearest Approved Kenwood Centre
Where to Buy
Tweet |
Key Features
TDMA 2-slot 12.5 kHz Bandwidth equivalent to 6.25 kHz very narrow bandwidth |
Complies with ETSI DMR Standard TS 102 361-1, -2 & -3 |
Operates in DMR Digital and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue) |
5-Tone Encode/Decode |
Voice Guide Function |
MIL STD 810 G and IP54/55 |
Easy Visible Display - 8-digit LCD model featuring high-contrast, white backlit LCD |
Standard Keypad |
PMR General Features
Multi-coloured LED | Yes |
2-Tone Signalling | Yes |
Battery Saver Mode | Yes |
Battery Status Indicator | Yes |
Busy Channel Lock-out | Yes |
Calling Alert | Yes |
Compact Design | Yes |
Data Mode Operation | Yes |
Ease of Operating Use | Yes |
Embedded Message | Yes |
Emergency Call Function | Yes |
Emergency Key | Yes |
Emergency Advanced Motion Detection Function | No |
Enhanced Kenwood Audio | Yes |
Flash Upgradeable Firmware | Yes |
FleetSync | Yes |
Illuminated Keys | Yes |
Kenwood ESN (Electronic Serial Number) | Yes |
Key Beep On/Off | Yes |
Key Lock | Yes |
Front-panel Control Keys | Yes |
Front-panel Keypad | Yes |
LCD Display | Yes |
Lone Worker Function | Yes |
Low Battery Warning | Yes |
MDC-1200 | Yes |
Minimum-Volume Setting | Yes |
Monitor Button | Yes |
Multiple Scanning Function | Yes |
Operator Selectable Tone | Yes |
PC Programming & Tuning | Yes |
Power-On Message | Yes |
PTT ID | Yes |
QT (CTCSS) / DQT (digital) | Yes |
Talk Around | Yes |
"Talk Back" Scanning Function | Yes |
Time-Out Timer | Yes |
Voice Annunciation | Yes |
Voice Inversion Scrambler | Yes |
Windows PC Programming and Tuning | Yes |
DMR Features
AMBE+2 Vocoder | Yes |
Direct Mode (P2P) | Yes, Selectable from ETSI newer or older definitions |
Individual Call with Acknowledgement | Yes |
Single-slot Data Timing | Yes |
TDMA 2-slot System Architecture | Yes |
Applicable Standards
IP54 | Yes |
IP55 | Yes |
MIL-STD 810 C/D/E/F/G | Yes |
Technical Specifications
Frequency Range | 136 - 174 MHz |
Number of Channels | 260 |
Number of Zones | 128 |
Channel Spacing - Analogue - Wide/Mid/Narrow | 25 kHz/20 kHz/12.5 kHz |
Channel Spacing - Digital - Wide/Narrow | 12.5 kHz/6.25 kHz |
Battery Life | With KNB-82LC: ± 19.0 h (TDMA) - 5-5-90 - |
Frequency Stability | ± 0.5 ppm (-30 °C to + 60 °C) |
Operating Temperature Range | -30 °C to + 60 °C |
Operating Voltage | 7.5 V DC ± 20% |
Dimensions | With KNB-82LC: 2.13 x 4.84 x 1.32 in (54 x 123 x 33.5 mm) Radio only: 2.13 x 4.84 x 1.32 in (54 x 123 x 33.5 mm) - Projections not included - |
Weight (net) | With KNB-82LC : 10.4 oz (295 g) Radio only : 6.2 oz (175 g) |
Receiver Specifications
Adjacent Channel Selectivity (Analogue) | 74 dB at 25 kHz 68 dB at 12.5 kHz |
Audio Output | 1 W (Internal) |
Intermodulation (Analogue) | 70 dB |
Sensitivity (Analogue) - EIA 12 dB SINAD | 0.24 µV at 12.5 kHz 0.20 µV at 25 kHz |
Sensitivity (Digital) | 5% BER: 0.20 µV at 12.5 kHz 1% BER: 0.25 µV at 12.5 kHz |
Spurious Reponse Rejection (Analogue) | 70 dB |
Transmitter Specifications
RF Power Output | 5 W / 4 W / 2.5 W / 1 W |
Audio Distortion | 2% |
FM Hum & Noise | Analog @ 12.5 kHz : 40 dB Analog @ 25 kHz : 45 dB |
Spurious Emission | -70 dB |